LMP91000EVM: Driver workaround not working

Roland Melad

Intellectual 1185 points

Part Number: LMP91000EVM

Hello,

We have a customer who downloaded the driver file found on this post:

e2e.ti.com/.../2445045

Windows says there is no driver for the board in that folder

Can you help check? Any other file we can share with our customer. Thank you.

Regards,
Roland

over 4 years ago

0 Gordon Varney over 4 years ago

TI__Genius 9380 points

Signed NSC_USB_v1.0.8.0.zip

Roland,

This should solve your problem.

0 Roland Melad over 4 years ago in reply to Gordon Varney

TI__Intellectual 1185 points

Hello Gordon,

Thank you for your response. We have provided the file to our customer however they have mentioned that the driver is not found or recognized by their system. Do we have any specific instructions how they can use the file?

Regards,

Roland

0 Josh Wyatt over 4 years ago in reply to Roland Melad

TI__Guru* 91206 points

Roland -

Normally, with zip file, one unzips it, then when needed, navigate to the file path where it it.

0 Gordon Varney over 4 years ago in reply to Josh Wyatt

TI__Genius 9380 points

Roland,

The zip file contains the INF drivers. They are not self installing. You have to go to the hardware properties of the SPIO-4 board and run a manual update of the drivers. As Josh pointed out, you have to unzip the file, then when manually updating the drivers you have to go to the location of the unzipped INF files.

Sensors

Sensors forum

LMP91000EVM: Driver workaround not working