DCA1000EVM: DCA 1000 EVM

THE ERROR WHICH I RECIVED BY OUTPUT 

[11:49:22] MSS FW Download failure
[11:49:26] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[11:49:26] Status: Failed, Error Type: RESP TIMEOUT
[11:49:30] MSS Power Up async event was not received!

TO CONNECT SPI

Hello Faisal,

I see you have attached a small snippet of the output log from studio, but it would be good if you could send us the entire mmWave studio output log. From your given inputs, it seems the MSS FW was not downloaded properly which is hence leading to the SPI error.

Also, please let us know the AWR device you're using here and the mmWave Studio version. 

Make sure that you're using the correct device firmware and SOP mode for that.

Regards,

Ishita

i connect every thing like training video 

my device is AWR1843BOOST 

But the problem is SOP disconnected still 

i guess something wrong with config buttons of DCA1000EVM , that is why disconnected  

I want basic start config of DCA1000EVM 

is shown if you see 

i try manually and by browse Data capture demo to run direct 

Hello

Please help us understand which TI's mmWave EVM are you trying to connect the DCA1000 to?

THank you,

Vaibhav