AWR1843BOOST: Unable to get micro doppler signature in post processing

Ali Hanif

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1843

Hi,

I am using AWR1843 with DCA1000 for data capture.I am capturing 100 frames.In post processing,there is an option of micro doppler in mmwave studio.When i press it i am getting Matlab dialogue box which says"please wait" but nothing happens and i am not getting the micro doppler plots.Pl guide

Thanks

over 4 years ago

0 Ishita Kochar over 4 years ago

TI__Mastermind 31680 points

Hello Ali,

Wishing you a very Happy New Year.

Now regarding your concern, upon clicking the "micro-doppler" menu, you'll be prompted to put in the microdoppler regions you're interested in seeing. Are you not getting that?

Regards,

Ishita

0 Ali Hanif over 4 years ago in reply to Ishita Kochar

Prodigy 115 points

Hello Ishita,

I have put the limits but after that it keeps displaying the 'please wait' dialog box and displays nothing.

0 Ishita Kochar over 4 years ago in reply to Ali Hanif

TI__Mastermind 31680 points

Ali,

Can you restart studio and try again maybe?

If that also doesn't work, please send us your configuration and captured bin file. I will try this on my setup as well.

Regards,

Ishita

Sensors

Sensors forum

AWR1843BOOST: Unable to get micro doppler signature in post processing