• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 275 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1843: CAN-D Interface is connected to the CAN Bus?

Shankar Nagarajan
Intellectual 275 points
Part Number: AWR1843


Hi,

I am working with CAN-D interface on AWR1843. Other end, I am using PCAN.

Is there any register for checking the CAN-D interface is connected to the CAN Bus?

If so, please mention the register or else suggest any ideas to check the CAN-D interface is connected or not.

Regards,

Shankar.N

  • 0
    TI__Mastermind 24955 points

    Shankar,

    The closest register I would suggest would be the Error and Status Register for the DCAN module. This is found on page 2462 of the AWR14/16/18 TRM.

    This register has two bits, RxOk and TxOk, that could be used to achieve what you are looking for.

    Regards,

    Kyle