Hi sir,
I have purchased the TI AWR1243P Cascade Radar and MMWCAS-DSP-EVM. Currently,
I can capture the adc data through mmwave studio and postprocess the data using matlab.
However, in my use case, I had better capture adc raw data and display the corresponding range-azimuth map in real time.
How can I realize this function using your sdk.
I didn't see a similar example in your help files.
Thanks a lot.
Hello Frank,
The Processors SDK for Radar (http://www.ti.com/tool/PROCESSOR-SDK-TDAX) does provide some real-time processing examples. Please download the package and refer to the existing documentation. One of these is an example streaming processed FFT, azimuth heatmap and point cloud to a host PC running an associated MATLAB network packet processor and GUI.
mmWave studio is architected only for offline processing of data.
Also, this concern has been addressed by our experts in the past and you should be able to find several related threads on this forum. Please use your search engine to look for those. I have produced one of them below for you :
Regards,
Ishita
