This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK-ODS: Getting detections at a particular zone for all kinds of configuration

Part Number: IWR6843ISK-ODS
Other Parts Discussed in Thread: MMWAVE-SDK

Hi

I am running the demo binary for 68xx sensor. I am getting detections at a particular (x,y,z) values which are persistent across all kinds of configurations. The points are present even though I increase CFAR threshold to a high level. I suspect a hardware issue on this board. I have raised a support ticket for the same issue and they require authorization from the e2e engineer. Please let me know what can be done.

Thanks & Regards,

Prathith Vasudev