AWR2243: Sensors forum

dt lee

Prodigy 40 points

Part Number: AWR2243

Hi,

Using Processor_SDK_RADAR, I am developing mmWave radar solution.

The latest version of processor_sdk_radar is 03_08, but it was released 1 and half years ago.

Can I get new version of processor sdk radar?

Regards,

dt.lee

over 4 years ago

0 Ishita Kochar over 4 years ago

TI__Mastermind 31680 points

Hello dt.lee,

That is the latest revision for now. Processor SDK doesn't officially support AWR2243 cascade for now.

Here is an old thread discussing the migration of Processor SDK to AWR2243 cascade. You might want to refer to that :

https://e2e.ti.com/support/sensors/f/sensors-forum/882929/awr2243-the-appimage-form-sdk3-7-and-sdk3-8-can-not-running-in-cascade-radar-with-awr2243/3344366#3344366

Also, one more point to note is

- if you have AWR2243 ES1.0 (Engineering) then the latest DFP version for that silicon sample is DFP 2.2.0.3

https://software-dl.ti.com/ra-processors/esd/MMWAVE-DFP-2G/02_02_00_03/index_FDS.html

But if it AWR2243 ES1.1 (production) then it requires DFP 2.2.2.1

https://software-dl.ti.com/ra-processors/esd/MMWAVE-DFP-2G/latest/index_FDS.html

And ES1.1 got a slight change in boot sequence compare to ES1.0 which is explained in 'C:\ti\mmwave_dfp_02_02_01_00\docs\mmwave_dfp_user_guide.pdf' (section 9.2) or in the C:\ti\mmwave_dfp_02_02_01_00\ti\example\mmWaveLink_SingleChip_Example\mmw_example.c (DFP example).

Hope that gets you started

Regards,

Ishita