AWR2243BOOST: Using AWR2243BOOST EVM without DCA1000EVM

Li Chen92

Expert 3040 points

Part Number: AWR2243BOOST
Other Parts Discussed in Thread: DCA1000EVM

Hi TI expert

How to use awr2243boost to evaluate performance without dca1000evm?

Best regards,

Thomas

over 4 years ago

0 Ishita Kochar over 4 years ago

TI__Mastermind 31680 points

Hello Thomas,

What are you trying to achieve with the mmWave sensor i.e. AWR2243Boost? DCA1000 is required in case you want to capture raw ADC data using the AWR device.

You might want to refer to a similar thread linked below :

https://e2e.ti.com/support/sensors/f/sensors-forum/927118/awr2243boost-awr-2243-boost-first-steps/3427403

Hopefully this will clarify some things for you.

Regards,

Ishita

Sensors

Sensors forum

AWR2243BOOST: Using AWR2243BOOST EVM without DCA1000EVM