MMWCAS-RF-EVM: SYNC_OUT signal in single chip mode

KenF

Part Number: MMWCAS-RF-EVM
Other Parts Discussed in Thread: AWR2243, AWR1642, AWR1843

Hi Experts,

We would like to use SYNC_OUT signal for synchronization with external IC. Is it possible to output SYNC_OUT in single chip mode (1 chip mode)? If it is possible, please let us know how to do that.

Best regards,

Ken

over 4 years ago

0 Cesar over 4 years ago

TI__Guru*** 149084 points

Hi,

The HW team will review this question and will get back to you

thank you

Cesar

+1 Vivek Dham over 4 years ago

TI__Guru 58035 points

Hello Ken,

Which MMIC device are you using? I assume you are referring to the digital SYNC OUT signal.

In the a front end device, like AWR2243, it is not possible to enable the digital SYNC OUT in single chip mode. But in integrated MMICs, like AWR1642, AWR1843 etc. the user application can pinmux the Digital SYNC OUT signal.

Regards,
Vivek

0 KenF over 4 years ago in reply to Vivek Dham

TI__Expert 7150 points

Hello Vivek,

It is AWR2243P. I understand it is no possible. Thank you.

Regards,

Ken

Sensors

Sensors forum

MMWCAS-RF-EVM: SYNC_OUT signal in single chip mode