TIDEP-01012: I want to use TIDEP-01012 to obtain point cloud information under ros. Are there any open source codes and routines?

Weiwei Shen

Part Number: TIDEP-01012

I want to use TIDEP-01012 to obtain point cloud information under ros. Are there any open source codes and routines?Is the information read through the serial port?

over 4 years ago

0 Cesar over 4 years ago

TI__Guru*** 149434 points

Hi,

TIDEP-01012 describes how to use the cascade kit to capture raw data. It does not enable real-time data streaming. Matlab post processing scripts are provided in mmWave Studio.

Is this what you are looking for?

Thank you

Cesar

0 Weiwei Shen over 4 years ago in reply to Cesar

Prodigy 225 points

I want to experiment with 2.7 mmWave Automotive Imaging Radar System-Long Range Detection. Where do I download mmWave Studio from？What software do I want to download？

0 Ishita Kochar over 4 years ago in reply to Weiwei Shen

TI__Mastermind 31680 points

Hello,

Closing this thread since the concern was already answered in the below thread :

https://e2e.ti.com/support/sensors/f/sensors-forum/998128/awr1243boost-2-7-mmwave-automotive-imaging-radar-system---long-range-detection

Regards,

Ishita

Sensors

Sensors forum

TIDEP-01012: I want to use TIDEP-01012 to obtain point cloud information under ros. Are there any open source codes and routines?