AWR1843AOPEVM: Cannot flash demo binary file onto awr1843aopevm

Nikola Matic

Part Number: AWR1843AOPEVM
Other Parts Discussed in Thread: UNIFLASH, AWR1843AOP, AWR1843

Hello

I am trying to upload the "xwr18xx_mmw_aop_demo.bin" file onto my awr1843aopevm. I am using UniFlash 6.3.0 and I have selected the "awr1843" as my part (because there is no option for awr1843aop - maybe this is the problem I am not sure?).

I made sure that the correct com port is selected for the flashing process and I set my awr1843aopevm to standalone mode, but when I flash, UniFlash gets stuck and I see the last message in the consol say "Cortex_R4_0: Set break signal".

Any assistance would be appreciated thanks.

over 3 years ago

+1 Jitendra Gupta over 3 years ago

TI__Guru 69500 points

Hi,

Looks like SOP setting is not set properly. Could you get us the picture of your EVM SOP settings?

0 Nikola Matic over 3 years ago in reply to Jitendra Gupta

Prodigy 10 points

Hi, thanks for the reply.

0 Nikola Matic over 3 years ago in reply to Jitendra Gupta

Prodigy 10 points

Hi, thanks for the reply.

0 Nikola Matic over 3 years ago in reply to Nikola Matic

Prodigy 10 points

My switch settings are as follows:

s1.3 and s1.4 are both OFF

and s3 I have tried to turn on when I flash (so press the sw3 button) but this did not work and I have also tried leaving it off and this did not work also.

Sorry for not providing a picture, I am not sure how to do this, when I go to "insert>image/video/file" it only allows me to put a link of an image not to upload from my pc

0 Nikola Matic over 3 years ago in reply to Nikola Matic

Prodigy 10 points

Sorry, I think the problem was that I was trying to use the wrong usb port on my computer, once I connected my device to a different usb port it managed to flash the code without any problems. Thanks for the help

0 Nikola Matic over 3 years ago in reply to Nikola Matic

Prodigy 10 points

0 Cesar over 3 years ago in reply to Nikola Matic

TI__Guru*** 141404 points

Great to here it is resolved

thank you

Cesar

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Sensors

Sensors forum

AWR1843AOPEVM: Cannot flash demo binary file onto awr1843aopevm