• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 769 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MMWAVE-STUDIO: DCA1000 with IWR1443 using mmWave studio GUI

MMWAVE-STUDIO: DCA1000 with IWR1443 using mmWave studio GUI

Mitsuharu Iwasaki7
Intellectual 540 points
Part Number: MMWAVE-STUDIO

Hello Michelle,

We tried MATLAB with reference to the following E2E.

e2e.ti.com/.../710412 
e2e.ti.com/.../711540 

We excuted RSTD_Interface_Example.m in MATLAB after we excuted RSTD.NetStart() in Lua Shell.

It seems to have failed. According to the log file connection (RadarAPI) seems to have failed.

We attachied log files.

Q1: Do you have any improvements or any ideas?

 We couldn't read all e2e answer screen above e2e. We could only read until "This thread has been locked."

Q2: Could you email all e2e answer by PDF or HTML?

Best Regards.,

Mitsuharu Iwasaki

  • 0
    TI__Genius 11405 points

    Mitsuharu,

    The e2e ticket is locked which means others can't add comment to it but it doesn't stop people viewing it. You could still use the scroll up/down and use button at the bottom to turn pages if needed.

    To save your time, here's the key point in those e2e tickets. The issue was related to a bug which can be fixed by replacing mmWaveStudio.exe.config under C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\RunTime. The corrected file is attached herehttps://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/1023/7357.mmWaveStudioConfigUpdate.7z

    Let me know if you still have issues.

    Thanks and Regards,

    Michelle