AWR1243BOOST: AWR1243Boost

Moha

Part Number: AWR1243BOOST
Other Parts Discussed in Thread: AWR1243

Hi,

We are working on AWR1243Boost+DCA1000 and processing the real-time data through Ethernet IP packets in a PC. There are some details of format of data in a logged file; however, I could not find any document that describes the details and arrangement of data in UDP packets.

Can you help me and refer me to some useful links or documents that I understand the format of data in IP packets.

Thanks

over 6 years ago

0 Jitendra Gupta over 6 years ago

TI__Guru 69960 points

Hi,

Please refer to these app-note documents.

http://www.ti.com/lit/an/swra581b/swra581b.pdf

http://www.ti.com/lit/an/swra555/swra555.pdf

Regards,

Jitendra

0 Moha over 6 years ago in reply to Jitendra Gupta

Prodigy 40 points

Thanks for your help.

I have another question.

I want to use 5 AWR1243BoostEVM + 5 DCA1000 and connect all of them to a 4-port Ethernet card.in a PC. All sensors have the same source and destination IP address and port number.

How can I separate UDP data packets from different sensors? Is it possible that I change IP address or data port in DCA1000 boards?

Regards,

Moha

0 Anand Gadiyar over 6 years ago in reply to Moha

TI__Genius 15005 points

Hi Moha,

While it is indeed possible to change the IP address on each of the DCA1000 EVMs, this is not currently supported in mmWave Studio.

This support for changing the IP address on the DCA1000s will be added shortly in an upcoming update.

Note that we do not currently support controlling multiple AWR1243 BOOST EVMs from a single PC. You might need to configure each EVM one at a time.

Best Regards,

Anand

Sensors

Sensors forum

AWR1243BOOST: AWR1243Boost