• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 617 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: What's the calibration temperature in mmWave Studio and Where did it measured?

Roger Chen5
Prodigy 210 points
Part Number: AWR1642BOOST

Dear support team

I found that there is a calibration temperature in the mmWave Studio.

Could you tell me What does the calibration temperature mean and Where did it measured?

Regards

Roger

  • 0
    TI__Genius 15005 points
    Hi Roger,

    The temperature in the report is the measured device temperature at the time of calibration. This is the average of the temperature readings from the temperature sensors located near the TX and RX channels in the device.

    For more information on calibration-related topics, I would recommend our application note on the topic: www.ti.com/lit/an/spracf4/spracf4.pdf

    Best Regards,
    Anand