Need sensorpath.sys & sensorpath.inf files .

sudhaleswar behera

Other Parts Discussed in Thread: SPUSI2, LMP92018

Hi TI Technical Support Team .

We purchased SPUSI2/NOPB & LMP92018 Evaluation Board from your Distributor "MOUSER" and finding USB driver Issues. As per the Installation guidelines , it states need to copy sensorpath.sys in C:\Windows\system32 folder & sensorpath.inf in C:\Windows\system32\drivers folder. Could you help to let me know where can I find these files . I downloaded S/W Sensor Signal Path Control Software & TinyI2CSPI software and personality files but could not find such files . Please advise .

Best Regards

SudhaL

------------------

over 6 years ago

0 Paul_Frost over 6 years ago

TI__Guru 55963 points

Hi Sudhal,

This appears to be a duplicate thread to https://e2e.ti.com/support/sensors/f/1023/t/874194

I will close this one and focus on the other.

Thanks,

Paul

0 sudhaleswar behera over 6 years ago in reply to Paul_Frost

Prodigy 130 points

Hi Paul,

It is not duplicate Issue . Please also focus on this . Once you provide these two Files, I will have solutions and can communicate between SPUSI2/NOPB eva Board with LMP92018 Eva Board through TINYI2CSPI Application S/W . In this case I don't need additional Micro-controller to communicate to LMP92018 through SPI.

Best Regards

SudhaL

------------------

0 sudhaleswar behera over 6 years ago in reply to sudhaleswar behera

Prodigy 130 points

Hi TI Technical Team.

I also tried with Window-7 and having same issues as Window-10 , So, it seems it is nothing do with Operating System versions but required USB Drivers files . Could you help to provide me the USB drivers for SPUSI2/NOPB or provide me a link/Location to download (if it is required)

Best Regards

SudhaL

-------------------

0 sudhaleswar behera over 6 years ago in reply to sudhaleswar behera

Prodigy 130 points

0 sudhaleswar behera over 6 years ago in reply to sudhaleswar behera

Prodigy 130 points

Please find Vendor ID (VID) & Product ID (PID) below to locate the USB driver

USB\VID_0400&PID_3111&REV_0000

Sensors

Sensors forum

Need sensorpath.sys & sensorpath.inf files .