Customer wants to understand the parameter comparison or difference between TMUX1511PWR & SN74CBTLV3126PWR, as they found the two devices are P2P to each other but the wave form of TMUX1511PWR performs better. They want to check if they need to pay any attention when using across these two. Thanks.
Hello Yu-Chen,
Here is the parameter comparison for the TMUX1511PWR and the SN74CBLV3126PWR:
As you can see above what is highlighted in green is the strength of one device compared to the other.
To summaries the comparison between the two:
The TMUX1511 has stronger parameters than the SN74CBTLV3126. It has lower Ron, Low leakage current, has more safety features and 1.8V logic compatible.
The SN74CBTLV3126PWR has more types of packages and the transition time from the control input is much lower than the TMUX1511.
For more information about the two devices I have provided the links for the datasheet of each device:
SN74CBTLV3126 - https://www.ti.com/lit/ds/symlink/sn74cbtlv3126.pdf?ts=1655730391051&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FSN74CBTLV3126
I hope the information I have provided was what you were looking for and let me know if you have any more concerns or questions!
Thanks,
Nir
Also, the TMUX1511 has a big improvement over the bandwidth performance. It is 3GHz compared to the SN74CBLTV3126, which has bandwidth of 200MHz as seen below:
The picture with the green highlight shows the specs of the TMUX1511 and in red is the SN74CBLTV3126.
Best,
Nir
