Hi team,
There is package info difference between Japanese datasheet and English datasheet. Could you please confirm which one is correct?
Top is from Japanese datasheet, and bottom is from English one. Both initial version.


Best regards,
Kurumi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
There is package info difference between Japanese datasheet and English datasheet. Could you please confirm which one is correct?
Top is from Japanese datasheet, and bottom is from English one. Both initial version.


Best regards,
Kurumi
YCJ package information (ti.com/lit/pdf/mxbg456):
Web search function:
All datasheets show that the size of the cavity in the tape is 1.46 mm × 1.46 mm, so the 1.5** mm dimensions must be wrong.
Hi Kurumi,
Thank you for pointing this out. As Clemens mentioned, I would go with the ti.com YCJ package information link for the most accurate information here. There must have been some issue when translating data between datasheets when this device was released. I'll have the team address this issue soon.
Thanks!
Alex
Hi Clemens,
Thank you for checking YCJ package info.
Hi Alex,
Understood on translating data issue. Would you please confirm size (Length*Width) of YCJ package? It is 1.34mm^2 on 1st page of the datasheet (English version), 1.329max~1.269min mm^2 on PACKAGE OUTLINE section of the datasheet (English version), and 1.4mm^2 on parametric search page.
YCJ package information link does not provide D and E values.



Best regards,
Kurumi
Hi Kurumi,
The real length*width of the device is indeed the D/E values in the datasheet - 1.329max ~1.269 min mm^2. The 1.34mm^2 and 1.4mm^2 are likely attributed to rounding errors when publishing those values.
Apologies for any confusion this may have caused!
Thanks!
Alex