TMUX136: Request: REACH declaration including Annex XIV and Annex XVII

Hello David,

Could please send a example document of what you are looking for?

I have personally not seen this document before but please send me a example and I can see if I can find what you are looking for.

Regards,

Kameron

Hello Kameron,

Please see the attachment as an example. STMicro_REACH_Declaration.pdf Current REACH document I can find from TI only includes Annex XVII. May I have a modified one also including Annex XIV?

Hello David,

Thank you for sending the competitors reach declaration.

1.I could not find the REACH Declaration with annex information for the TI device online so could you please send me the Document for this device.

This all I found

2.In addition I will talk with our product engineering team to see if we can add too our modify the existing document.

Regards,

Kameron

Hello David,

So after talking to the PE Team about this device TI has a general statement about REACH for devices. This device has a Yes status for REACH according to TI.com

Here is Texas Instruments REACH Statement: Statement on REACH Articles Provisions from Texas Instruments (Rev. AG)

In addition, this information is available under Quality & Reliability. 

The Mux team doesn't have authority to change TI's company wide statement on Reach.

You can try to reach out to the customer support team linked below to try to find out more information on this. 

https://ticsc.service-now.com/csm/?_ticdt=MTYzMjI0MzAyM3wwMTdhYmY0M2MxNGEwMDA3YzczM2EyNjZiMWMxMDMwNzMwMDFhMDZiMDBiZDB8R0ExLjIuMjEwNjkyMzY2MC4xNjI2NzA2NTI3

Thanks,

Kameron

Hi Kameron,

The REACH statement was the one I found which doesn't include Annex XIV. Is it available to generate a statement just for TMUX136MRSER?

Hi David,

From what I have read TI Reach statement is company wide and the mux product line doesn't not have authority to edit/change by itself.

Is there a example of another TI Product having individual REACH declarations?

In general I would recommended reaching out to customer support as e2e is more of a technical forum for circuit design questions

Regards,

Kameron

Hi Kameron,

I tried. Please forward my request to anyone who you think is responsible. Too hard to ensure if I can get my answer. Thanks.

Hello David,

After talking to our PE Team, it looks to that our product line doesn't have authority to do this.

Please let me know if there is any other way I can assist you.

Regards,

Kameron

Hello Kameron,

Is it possible to forward my request to the one who has the authority?