This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dears,
My customer uses SN3257 for power-off protection, but there is leakage of 0.3V, which makes it impossible to achieve complete isolation. Is there any solution?
Many thanks!
Arabella Zhang
Hello Arabella,
Can you please elaborate on the application?
What signals are inputted to the device? What is the supply? Where are they seeing the leakage?
Also sharing the schematic will help.
Thanks,
Nir