• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 291 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TINA/Spice/MUX36D08: Operating point not found

MUX36D08: Is there a spice model for this part that will work in Microcap?

Craig Desrosiers
Prodigy 20 points
Part Number: MUX36D08


Tool/software:

I'm using Microcap 12 for simulation, is there a MUX36D08 spice model that will work there? 

  • 0
    TI__Mastermind 24440 points

    Hello Craig,

    I can not really support anything with  microcap 12 as that is a third party simulation tool.

    The models our team creates is usually use in the PSPICE for TI simulation environment.

    However  a potential solution we can try is to make a passive stand in for this device in the Microcap 12 environment.

    Please look at this FAQ as it can give some potential guidance into making a passive model.

    Please let me know if you need any further assistance.

    Regards,

    Kameron