• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 210 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMUX136: Using the TMUX136 as a 4:1 Mux @ 10 MHz

TMUX136: TMUX136 and Diode co-lay DIO3000QN10 SCH review

Brian Chan
Expert 6450 points
Part Number: TMUX136

Tool/software:

Hi Team

could you help me review below SCH?

t-customer_dc-scm_r101_250210-3.pdf

total have three TMUX136 U6,U7,U12 

BRs

Brian

  • 0
    TI__Mastermind 35168 points

    Hi Brian,

    TMUX136 will support USB frequency and the signals should be under 3.3V so voltage checks out too. So everything looks good on the schematic! Just have them keep those bypass capacitors on the supplies as close to the device as possible for the layout and it should be good to go!

    Thanks,
    Rami