Dear Sirs
Could your explain the following three specification in detail?
TKS
Nat
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Nat,
Take a look at this application note "Understanding and interpreting standard logic datasheets" page 39
Ron and deltRon
Ron flat
On-state resistance for a signal switch will vary based on the input/output voltage on the drain or source changing the FET Vgs. Ron flat is the difference between the lowest and highest Ron value or how flat the ron vs input/output voltage curve is.