SN74CB3Q3306A: Enquire ƟJC Spec for SN74CB3Q3306APWR

Tiger Yeh

Expert 4915 points

Part Number: SN74CB3Q3306A

Hi~

Could you please advise ƟJA Spec for SN74CB3Q3306APWR?

I cannot find it in the datasheet.

over 7 years ago

0 Louie over 7 years ago

TI__Expert 3180 points

Hello Tiger,

The SN74CB3Q3306APWR falls into the PWR package category, as listed below:

Which means that it should be about 88 C/W MAX according to our datasheet's absolute maximum ratings:

Please pay close attention to the notes listed below.

Thank you,

Louie

0 Tiger Yeh over 7 years ago in reply to Louie

TI__Expert 4915 points

I am very sorry for typo.
I mean ƟJC, not ƟJA.
Please advise ƟJC for this part, thanks!

0 Louie over 7 years ago in reply to Tiger Yeh

TI__Expert 3180 points

Hello Tiger,

Please refer to the snippet below for the ƟJ value for the SN74CB3Q3306A,

Thank you,

Louie

0 Tiger Yeh over 7 years ago in reply to Louie

TI__Expert 4915 points

Thank you, Louie.

Here, the table of ƟJA is 190.8 degC/W, but ƟJA in the datasheet is 88degC/W.
I am confusing. Please double confirm ƟJC is correct.

0 Louie over 7 years ago in reply to Tiger Yeh

TI__Expert 3180 points

Hello Tiger,

When the spec on the data sheet was run, the Theta JA was run under a different condition(absolute maximum ratings), which will change the value which you receive.
When we remodeled the part, we ran them under different conditions (standard datasheet values)
Please refer to the attached app note for further explanation in the differences of values:
www.ti.com/.../spra953c.pdf

Thank you,
Louie

0 Tiger Yeh over 7 years ago in reply to Louie

TI__Expert 4915 points

Thank you, Louie.

Have a nice day.

Switches & multiplexers

Switches & multiplexers forum

SN74CB3Q3306A: Enquire ƟJC Spec for SN74CB3Q3306APWR