• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 3 answers
  • Subscribers 17 subscribers
  • Views 1176 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74CB3T3306: My waveform is reversed when it passes through the switch

Adam Torma
Mastermind 45485 points
Part Number: SN74CB3T3306
Other Parts Discussed in Thread: SN74CBT3306, , SN74CB3Q3306A

e2e,

 

I'm using SN74CB3T3306DCTR , but found the B1 signal is reversed, the waveform as below.

I wonder does it happened in other project or do you have another recommend IC?

 

 


 

 

Channel 1 : A1 ;

Channel 2 : A0 ;

Channel 3 : B1 ;

Channel 4 : B0



 

Thank you,

Adam

  • 0
    TI__Expert 3180 points

    Hello Adam,

    We are disappointed to see these scope traces as there should be nothing internal to in our device that should cause this to happen.


    My team has some suspicions as what the issue could be, but we need you to help us by providing a few more scope traces.

    We believe that there could be either an internal short or perhaps a short happening on your board. 

    Since we cannot see where the other signals are coming from, we will suspect it is related to our part for now.

    Could you please provide us with a scope capture of only an input going into channel 1, and nothing going into channel 2.
    Could you also provide us with a scope trace with only a signal going into channel 2 and nothing in channel 1.

    Thank you,
    Louie

  • 0 in reply to Louie
    TI__Mastermind 45485 points

    Louie,

    I tried to use the SN74CBT3306 and didn't find the issue.  I still feel strange for this issue.

    Thank you,

    Adam  

  • 0 in reply to Adam Torma
    TI__Expert 3180 points
    Hello Adam,

    The performance you were seeing with the SN74CB3T3306 is unexpected, however, we cannot continue further investigation without the scope traces.

    I am glad you were able to resolve the issue with the SN74CBT3306.

    Thank you,
    Louie
  • 0 in reply to Louie
    TI__Intellectual 2430 points
    Dear Louie,

    Sorry for late, the issue was solved after they changed to use SN74CB3Q3306A.