2 to 1 switch for SPDIF signal

Nic Lin

Intellectual 2020 points

Other Parts Discussed in Thread: SN74LVC1G3157

Team,

Do we have a 2 to 1 switch which has 30MHz bandwidth? To support switching SPDIF signal.

Regards,

Nic

over 6 years ago

0 Adam Torma over 6 years ago

TI__Mastermind 45485 points

Nic,

You can find 2 to 1 switches by selecting the configuration 2:1 filter on the ti.com switch selection tool. Since SPDIF only uses one conductor and is low voltage (<500mV pp ) you can filter for 1-channel switches and all switches will handle this voltage. Next, you can sort by the bandwidth parameter.

It looks like the lowest cost option is the SN74LVC1G3157.

Would you please let us know what prevented you from finding this device quickly on Ti.com so that we may improve our customer experience?

Thank you,

Adam

0 Nic Lin over 6 years ago in reply to Adam Torma

TI__Intellectual 2020 points

Thanks Adam. I just searched the wrong category... I searched logic instead of switches...

Switches & multiplexers

Switches & multiplexers forum

2 to 1 switch for SPDIF signal