DG408LEDY-T1-GE3 replace

Hank Zhang

Expert 2040 points

Other Parts Discussed in Thread: MUX36S08

P2P,supply voltage:±5 or 0~10V

Is there any recommendation? Attached is the datasheetDG40xLE.pdf

over 6 years ago

0 Hank Zhang over 6 years ago

Expert 2040 points

any update

0 Dakotah over 6 years ago in reply to Hank Zhang

TI__Expert 3900 points

Hi Hank,

The DG408 device is a precision mux with low leakage current. For this application I would recommend the MUX36S08 which can handle the voltage levels you mentioned and has better leakage current specs.

The other option you can look at is CD74HC4051. Which also supports the voltage requirement but doesn't have as good of a leakage spec.

Switches & multiplexers

Switches & multiplexers forum

DG408LEDY-T1-GE3 replace