Multiplexer for Fiber Optics Application

Carlo

Other Parts Discussed in Thread: DS125MB203

Hi E2E,

Good day.

Do we have a 1:2 multiplexer with 4 channels that supports 10G and 40G fiber optics application to interface with QSFP+ and SFP+. The multiplexer will be used to switch between 40G and 10G.

Thank you in advance for your support on this.

Regards,
Carlo

over 5 years ago

0 Nasser Mohammadi over 5 years ago

TI__Guru* 93670 points

Hi Carlo,

I am assuming this multiplexing is in electrical domain. Right? Can you please draw a block diagram if possible? Or you can send me email if this is private.

Regards,, Nasser

0 Carlo over 5 years ago in reply to Nasser Mohammadi

TI__Expert 7715 points

Hi Nasser,

Thank you for responding.

According to our customer, it is electrical domain. The input is from 10G switch(4 lines each Operates at 10G speed) and output goes to SFP+ and QSFP+ . The multiplexer will select either SFP+ or QSFP+ path.

Do we have a product suitable for this application?

Regards,
Carlo