250W Analog Switch

Franz Figueroa32

Hi E2E,

Good day!

I have a customer that is looking for an analog switch that can handle 250W of microvolts signal. Do we have this kind of switch?

Best regards,

Franz

over 5 years ago

0 Saminah C over 5 years ago

TI__Genius 9132 points

Hi Franz,

I am going to move this to power switches team for a recommendation -

Our muxes (including new ones) can support current in mA. We do not have power muxes in our portfolio.

Regards

Saminah

0 Andy Robles over 5 years ago

TI__Genius 13760 points

Hi Franz,

Welcome to E2E!

Could you help clarify the voltage and current range in the application?

Best regards,

Andy Robles

0 Franz Figueroa32 over 5 years ago in reply to Andy Robles

TI__Intellectual 2660 points

Hi Andy,

Thank you for your support.

My customer states that the voltage level is in microvolts to millivolts range and has a power of 250W. I will check with my customer if they have an exact value.

Best regards,

Franz

0 Andy Robles over 5 years ago in reply to Franz Figueroa32

TI__Genius 13760 points

Hi Franz,

For working with a very small voltage range this application seems to have a very high power requirement. In order to be able to provide a proper suggestion I would need VIN (voltage applied to the device), and IOUT (Current being supplied to the load).

An explanation of the application the customer is trying to accomplish could also help me provide the best solution we may have in our portfolio.

Best regards,

Andy Robles

Switches & multiplexers

Switches & multiplexers forum

250W Analog Switch