This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

CCS V6 + Linux + Launchpad MSP430G2

Prodigy 60 points

Replies: 7

Views: 1731

Hi,

My question is along the line of this question ("CCSV5.2 for linux and msp430 launchpad, is debug supposed to work?") from 2012:

"https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/171173"

I have recently installed CCS V6 on a Linux (xubuntu 14.04 LTS) VM. I also have ergia installed on same VM. My target is Launchpad MSP-EXP430G2 (V1.4).

I'm able to program the target using energia but not with CCS.

I have searched for information involving CCS, Linux and Launchpad but have not come across any post involving all three.

My question is: Is it possible to program a device in Launchpad MSP-EXP430G2 using CCS V6 installed on Linux platform as of December 2015?

Am I missing a step or a doc or a technote?

Thanks.

  • Guru 121220 points

    The current G2 LaunchPad will not be supported by CCS on Linux or MacOS

     


    If my reply answers your question please click the "This resolved my issue" button

  • In reply to JohnS:

    Thanks for the information. Is this information published?

    Thanks.

  • Guru 121220 points

    In reply to msp-designer:

    This page has the most info when it comes to CCS support on Linux: processors.wiki.ti.com/.../Linux_Host_Support_CCSv6

    Regards,
    John

     


    If my reply answers your question please click the "This resolved my issue" button

  • In reply to JohnS:

    Hi John, 

    Could you tell me if this problem was solved? 

    I need debug the MSP430G on CCS V6 but not suported yet.

    Thanks,

    Edgar dos Reis

  • Guru 121220 points

    In reply to Edgar dos Reis:

    Edgar,

    Unfortunately there are no plans to ever support the current MSP430G2 LaunchPad on Linux or Mac.

    Regards,
    John

     


    If my reply answers your question please click the "This resolved my issue" button

  • Expert 1600 points

    In reply to JohnS:

    Hi,

    and sorry for hijacking this topic - but what is the reason linux support is not possible via CCS? Just for curiosity.

    I do development with msp-gcc and mspdebung under linux with the launchpad in classes and that works fine. But not to have a "supported" IDE is something I would like to see - especially since TI itself offers mspgcc.

    Cheers,
    Jan

    --
    Regards,
    Jan

    Found any horrible English mistakes? - Drop me a note as private conversation via my profile if you like ;-)

  • Guru 140105 points

    In reply to Jan:

    Jan,

    Please check the explanation from the MSP team at the post below:
    e2e.ti.com/.../1732961

    Regards,
    Rafael

    When posting, click on the link Insert Code, Attach Files and more... to attach images, files or use nice formatting.

    If my reply answers your question please click on the green button "This resolved my issue".

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.