Disassembly window displays "Unable to retrieve disassembly data from backend"

Randy Yates

Expert 1940 points

I'm using CCS V6.1.2.00015 on Fedora 23. I'm using the XDS100V2 debugger. My target is a BeagleBone Black and I am using the BeagleBoneBlack board for my target configuration.

The problem is that after I run my code, I cannot display disassembly at certain locations. The disassembly window displays "Unable to retrieve disassembly data from backend". See a screenshot here:

How can I display the disassembly of my code?

over 9 years ago

Randy Yates over 9 years ago

Expert 1940 points

PS: This only happens sometimes, not all the time. When I first load the program, these program locations can be disassembled without a problem.

Ki over 9 years ago in reply to Randy Yates

TI__Guru**** 472291 points

Hi Randy,
Sorry for the delay. It looks to be a potential bug with the disassembly view. If you close and reopen the view, does the issue go away?

Also, can you provide the program you are using?

Thanks
ki

Code Composer Studio™︎

Code Composer Studio forum

Disassembly window displays "Unable to retrieve disassembly data from backend"