xds200 driver for openocd

Francis Le Bourse

Prodigy 10 points

Hello,

I am trying to write an openocd driver for the Spectrum Digital XDS200 probe, largely copied from the xds110 one.

It doesn't work, all commands ('*', 0x01, 0x00, 0x00 for example) end in a timeout.

Does anyone know where I can find the relevant documentation of the probe ?

Thank you.

over 2 years ago

0 JohnS over 2 years ago

TI__Guru**** 159715 points

Francis,

This is not something that we support. I know you are trying to do it on your own but we reallly don't have much in the way of documentation to enable this.

One option would be to use the XDS GDB agent, even this is legacy software. The link below has a video at the end that shows how to generate the required board data file.

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/708036/ccs-tmdsidk437x-xds-gdb-agent-with-xds200-external-debug-probe

Regards,

John

0 Francis Le Bourse over 2 years ago in reply to JohnS

Prodigy 10 points

Thank you for your quick answer. I'll have to find another probe.

Code Composer Studio™︎

Code Composer Studio forum

xds200 driver for openocd