• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 291 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS V4.0 debug issue

rajesh beesetty
Expert 1315 points
Other Parts Discussed in Thread: TMS320F28335

Sir/Madam,

I am working on TMS320F28335 microcontroller. I've just followed the teaching module instructions. I've build the program and it has been sucessfully built with "0 errors 0 warning". But, after debug with Texas Instruments simulator, no output is being shown to run the program. Please find the screen shot of the CCS window after clicking debug below:

                                                                                                         l i

  • +1
    Mastermind 8075 points

    I anticipate you will be asked why you aren't using the latest version of CCS, v10.x. Also, I suggest you mention what board and debug device you are using.

  • 0 in reply to Kier
    Expert 1315 points

    Thak you for your reply...I am using CCS V4 and I'm comfirtable with that as all the tutorials provided by the TI are written on CCS Ver4.1..Coming to the issue it was very silly. I had to View--> Debug and I have got the window I am expecting...