Software evaluation report

Hu Schuman

Other Parts Discussed in Thread: TMS320F28335

Our company are using TMS320F28335 in the project, and we need to pass V&V validation, so we want some nesscessary reports about CCS, how can i get these reports?

1)User manual
2)Constraints / KnownProblems
3)Errata sheet / Bug list / Relese notes
4)Validation Report
5)HAZOP Analysis

over 4 years ago

0 MatthewPate over 4 years ago

TI__Guru* 84730 points

Hu,

Thanks for reaching out to the E2E forums. To clarify you are looking for the above just for the CCS IDE, independent of the F2833x device? Shall I assume you are using V11?

Best,

Matthew

0 Hu Schuman over 4 years ago in reply to MatthewPate

Prodigy 10 points

Thank you for your reply, yes, I am looking for the above reports only about CCS IDE, not F2833x device, because V&V do the validation only for the IDE. and I am using CCS V7.

0 MatthewPate over 4 years ago in reply to Hu Schuman

TI__Guru* 84730 points

Hu,

Thanks for the clarification, I'll try and get a response by tomm(11/1) end of day after pulling in some others.

Best,
Matthew

0 Hu Schuman over 4 years ago in reply to MatthewPate

Prodigy 10 points

thank you, you did me a great favor!

0 JohnS over 4 years ago in reply to Hu Schuman

TI__Guru**** 163045 points

Hu,

There are many different CCSv7 builds. However for this type of validation it is usually the C compiler that is important. If you can let me know which version of the compiler you are using in your CCS projects I can help provide the appropriate information.

Regards,

John