CCsv6: StarterWare installation guide

ArTzy

Other Parts Discussed in Thread: OMAP-L138

Hi Experts,

Good day. May we ask if we have this guide on how to install the StarterWare in CCSv6 to utilize its all example code?

It such that I have a client who can't use the hardware platform tms320c674x with CCsv10 since his JTAG emulator is SDX510usb which is not supported to CCSv8.

Thank you for your support.

Regards,
Archie A.

over 3 years ago

0 Ki over 3 years ago

TI__Guru**** 463781 points

Hello,

ArTzy said:
since his JTAG emulator is SDX510usb which is not supported to CCSv8.

CCSv8.3.1 is the last version to support the SD XDS510USB probe.

As for StarterWare, the customer can download and install it manually outside CCS. I will bring this thread to the attention of the device experts, who can assist further.

Thanks