• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 380 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

install_drivers.sh after CCS9 installation on linux

GukHyun Lee
Intellectual 260 points

hi, experts.

I am installing CCS9 on ubuntu 16.04

After finishing installation of CCS, I tried to execute ./install_drivers.sh

When I execute, I got message blew.

I also checked

"/etc/udev/rules.d/71-ti-permissions.rules"

# Texas Instruments USB devices
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="a6d0",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="a6d1",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="6010",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="bcd9",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="bcda",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="1cbe",ATTRS{idProduct}=="00fd",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="1cbe",ATTRS{idProduct}=="00ff",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef1",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef2",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef3",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef4",MODE:="0666"
SUBSYSTEM=="usb",ENV{DEVTYPE}=="usb_device",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="c32a",MODE:="0666"
ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef0",ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="0c55",ATTRS{idProduct}=="0220",ENV{ID_MM_DEVICE_IGNORE}="1"
KERNEL=="ttyACM[0-9]*",MODE:="0666"
ACTION=="add",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="a6d0",RUN+="/sbin/modprobe ftdi_sio",RUN+="/bin/sh -c 'echo 0403 a6d0 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"
ACTION=="add",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="a6d1",RUN+="/sbin/modprobe ftdi_sio",RUN+="/bin/sh -c 'echo 0403 a6d1 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"
KERNEL=="hidraw*",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef3",MODE:="0666"
KERNEL=="hidraw*",ATTRS{idVendor}=="0451",ATTRS{idProduct}=="bef4",MODE:="0666"
# Spectrum Digital USB devices 
SUBSYSTEM=="usb", ATTR{idVendor}=="0c55" ,ATTR{idProduct}=="0540", ATTR{manufacturer}=="Spectrum Digital Inc.",MODE="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="0c55" ,ATTR{idProduct}=="0510", ATTR{manufacturer}=="Spectrum Digital, Inc.",MODE="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="0c55" ,ATTR{idProduct}=="2000", ATTR{manufacturer}=="Spectrum Digital, Inc.",MODE="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="0c55" ,ATTR{idProduct}=="0562",MODE="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="0c55" ,ATTR{idProduct}=="0566",MODE="0666"

I wonder if I properly finished installation CCS9 and drivers

Really Thanks!