Code Composer Studio™︎

Code Composer Studio forum

State Resolved
Locked Locked
Replies 5 replies
Subscribers 54 subscribers
Views 573 views
Users 0 members are here

Support feedback

Options

Options

Related

CODECOMPOSER: Can't get Hardware Breakpoints to work

MFitz

Prodigy 20 points

Part Number: CODECOMPOSER
Other Parts Discussed in Thread: C2000WARE, TMS320F280049

Hi,

I had HW BP's working last week, I've had to close the project and reopen it a few times as I'm in the middle of porting the project to a different board, but when I went back to my TMS320F280049 I can apply Hardware Breakpoints, but they don't stop the device when reached although they did last week on the same project. The only other change has been a C2000Ware update.

Any suggestions, this is what the HW BP's look like now:

over 2 years ago

0 Siddharth Deshpande over 2 years ago

TI__Mastermind 35905 points

Hi,

Looks like the breakpoint is disabled from the screenshot.

Did you remove all breakpoint and try to set it again? Do you see any error message in the console while setting the breakpoint?

Best Regards

Siddharth

0 MFitz over 2 years ago in reply to Siddharth Deshpande

Prodigy 20 points

Yes I removed the bp's, no there was not an error message, I can not apply breakpoints to the 49 either now.

0 Siddharth Deshpande over 2 years ago in reply to MFitz

TI__Mastermind 35905 points

Hi,

Not sure what could be causing this behavior. Have forwarded your query to CCS team for assistance.

Best Regards

Siddharth

+1 Ki over 2 years ago in reply to MFitz

TI__Guru**** 464411 points

MFitz - I see that you enabled the button to "disable all breakpoints" in thhe Breakpoints view. Please toggle it to enable breakpoints again.

Thanks

ki

0 MFitz over 2 years ago in reply to Ki

Prodigy 20 points

Thanks!