TDA3XEVM: NAND Flash Algorithm Support in CCS

Hao Chen

Intellectual 605 points

Part Number: TDA3XEVM

Hello there,

We are using DRA78x, and NOR-flash and NAND-flash are connected.

NOR-flash is connected via QSPI, and we have the flash algorithm “qspi_flash_writer_ipu1_0_release.xem4” from SBL for CCS.
NAND-flash is connected via SPI, and we cannot find the flash algorithm for CCS. Do you know where we could get this?

Thanks in advance.

over 2 years ago

0 Kier over 2 years ago

Mastermind 9110 points

Maybe you will get a response in the Processors forum.

+1 John H. Gardner over 2 years ago in reply to Kier

TI__Guru 51971 points

Hao,

Talked to the application team regarding this. The OSPI driver is there, but the support for the NAND flash device driver is not available. When the TDA3-based device came out several years ago, serial NAND was not available. As such, no such driver was created.

John

0 Hao Chen over 2 years ago in reply to Kier

Intellectual 605 points

Kier, thanks for remainder.

Code Composer Studio™︎

Code Composer Studio forum

TDA3XEVM: NAND Flash Algorithm Support in CCS