• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 55 subscribers
  • Views 311 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS32C6713BGDPA200

Tracey Mullins
Prodigy 30 points

Need a way to program a TMS32C6713BGDPA200 DSP on a Windows 10 machine. We used a XDS510 on a Windows XP machine and it worked very well. We ordered a USB560 v2 System Trace device believing it would work but we get error that our device is not supported.

  • 0
    Guru 92251 points

    The TMDSEMU560V2STM-U product page does contain the following in the list of supported devices:

    C671x, C672x, C674x and C66x (Keystone I) Floating point DSPs

    With CCS 12.1 under Windows 11, the CCS target configuration editor is allowing a TMS32C6713 to be selected when using a XDS560v2 STM:

    Tracey Mullins said:
    We ordered a USB560 v2 System Trace device believing it would work but we get error that our device is not supported.

    What error do you get?

  • 0 in reply to Chester Gillon
    TI__Guru**** 464431 points

    Chester is correct, C671x is supported by the XDS560v2. Please provide the exact error you see.

    I was able to connect to my C6713 board using both Blackhawk and Spectrum Digital XDS560v2 debug probes with CCS 12.1.0

    As requested by Chester, please provide the exact error message you are getting.

    Thanks

    ki