TMDSSUB6000

Lina Widlund

Prodigy 40 points

Hi,

I tried to respond to you 5th of december, but now realised that the e-mail I got was a no reply address.

Hi,

I am ordering for a customer, it should be applicable to AD-CCES-NODE-1

BR, Lina

over 2 years ago

0 LeonardEllis over 2 years ago

TI__Guru 71526 points

Hello Lina,

AD-CCES-NODE-1 is an Analog Devices product. You will have to contact AD for information.

Regards,

~Leonard

0 Lina Widlund over 2 years ago in reply to LeonardEllis

Prodigy 40 points

Hi again,

What I really need is one or more options to TMDSSUB6000, which has gone obsolete.

What options do you have? So can I return to my client to check what they need.

BR, Lina

0 Ki over 2 years ago in reply to Lina Widlund

TI__Guru**** 464431 points

Lina - What device is your client using? TMDSSUB6000 is an old part number for a version of the tools that is no longer supported. Do they need these old version of the tools?

Thanks

0 Lina Widlund over 2 years ago in reply to Ki

Prodigy 40 points

Hi,

I am not sure. But from the start they wanted TMDSCCS-ALLN01-code Composer Studio IDE. We were told that this was obsolete, so we started to look for a replacement. We found out that the following were replacing:

C6000 CODE COMPOSER STUDIO

and

OMAP COMPOSER STUDIO IDE-PC V2.1

The customer accepted C6000 CODE COMPOSER STUDIO.

What do you have that can replace this?

Mvh, Lina

0 Ki over 2 years ago in reply to Lina Widlund

TI__Guru**** 464431 points

All the above mentioned products are obsolete and completely unsupported. I'm wondering if we can steer them towards using a newer version. This would depend on the device being used and if there is any particular limitations tying them to a particular old version.

Code Composer Studio™︎

Code Composer Studio forum

TMDSSUB6000