CODECOMPOSER: Processing tdf trace files

The 1st thing I want to use is seekpos parameter. But with a -seekpos 90, I have this message and my csv file is empty

[TD]: Calculating start seek percentage. This may take a few seconds...Data not preprocessed.

Hello,

David Pardessus said:

td -help gives me a broken link : http://processors.wiki.ti.com/index.php/TD

Can I find more documentation about td ?

I was able to access an archived version of the page. I have saved as a PDF and attached it here:

TD.pdf

Thanks

ki

Sorry, there is nothing more in the pdf than is the output of td -help ;-)

Regarding:

David Pardessus said:

The 1st thing I want to use is seekpos parameter. But with a -seekpos 90, I have this message and my csv file is empty

[TD]: Calculating start seek percentage. This may take a few seconds...Data not preprocessed.

The engineering team investigated a bit and reported that

seekpos is basically a random access into the trace data. It appears that this is no longer supported by td.exe

-seekpos 90 is to try to fast forward to the 90% mark and decode from there onwards. Instead of seekpos, try decoding the entire trace data by dropping -seekpos.

Thanks

ki