• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 55 subscribers
  • Views 1161 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to run code composer studio 2.2 on Windows 7

Raju Siravuri
Prodigy 40 points

Hi

We have a leagcy system where in we are using code composer studio 2.2. We are using XDS510USb emulator. I got a new laptop which has windows 7.

Is it possible to install code composer studio 2.2 on Windows 7? We don't want to move to code composer latest version.

 

Thanks

Raju

  • 0
    TI__Guru**** 171729 points

    Raju,

    It may work but we don't recommend using Windows 7 with any versions of CCS prior to 4.

    You can try to load Windows XP mode or a VmWare, but keep in mind the emulator device drivers are not meant to be used with virtual machines.

    Regards,

    Rafael

  • 0 in reply to desouza
    Expert 1015 points

    Hello:

    I am in a similar situation. I inherited a legacy product using two VC5502 DSP. Prior development was done on CCSv2.21.

    I tried to resurrect this development environment on a PC running Windows 7  64-bit.

    When I try to start CCSv2.21, I see the following popup error dialog box.

     

    I have not gotten past this.

    PJ

  • 0 in reply to Patrick McCloskey
    Expert 1015 points

    I should add that I am setting up a VC5502 development environment with CCS3.3 on Windows 7  64-bit for development for the legacy product.

    For new product development, I am already using CCS v5 on Windows 7  64-bit.

    I am also ramping up development with CCSv5 on Ubuntu Linux 10.04 LTS.

  • 0 in reply to Patrick McCloskey
    TI__Guru**** 481491 points

    Patrick - when trying to run CCSv3 or earlier on Windows 7, try running it in Administrator mode and Windows XP SP3 compatibility mode. You can set these properties in the desktop shortcut properties (or directly on the cc_app.exe).

    Thanks

    ki