CODECOMPOSER: Problems importin project with CCS Theia

Alex Paul

Part Number: CODECOMPOSER
Other Parts Discussed in Thread: MSPM0L1306, SYSCONFIG, LP-MSPM0G3507

Hi to all,

When trying to import the gpio_toggle_output project for MSPM0L1306 Launchpad it says:

[9]Running script...
[10]subdir_rules.mk:16: recipe for target 'build-107657313' failed
[11]Error: /ti/clockTree/clockTree.component.js: Validation failed: [

And I cannot open the syscfg file. How can I get this running?

Regards,

Alex

over 2 years ago

0 Ki over 2 years ago

TI__Guru**** 476411 points

Hi Alex,

Are you using the official release versions of CCS Theia (build 21) and the SDK (v1.0.0.4)? Which SysConfig version is your project configured for?

Thanks

0 Ki over 2 years ago in reply to Ki

TI__Guru**** 476411 points

Also specify if you are using PG1.x or 2.x hardware

0 Alex Paul over 2 years ago in reply to Ki

TI__Expert 5715 points

I Downloaded CCS Theia as well as the SDK 1.0.04 this morning from ti.com. And used the gpio_toggle example provided in the SDK

0 Alex Paul over 2 years ago in reply to Ki

TI__Expert 5715 points

I am Using the LP-MSPM0G3507 I think it still has the PG1.x hardware on it.

0 Ki over 2 years ago in reply to Alex Paul

TI__Guru**** 476411 points

What version of SysConfig are you using with the project? Is it the same version that was downloaded along with the SDK?

+1 Ki over 2 years ago in reply to Alex Paul

TI__Guru**** 476411 points

Alex Paul said:
I am Using the LP-MSPM0G3507 I think it still has the PG1.x hardware on it.

Please note that the official CCS Theia release and latest MSPM0 SDK only officially supports PG2.x hardware. PG1.x may would fine but there are no guarantees.

Code Composer Studio™︎

Code Composer Studio forum

CODECOMPOSER: Problems importin project with CCS Theia