Unable to set Breakpoints

Tom Cross

All,

I am running code on a F28335 with CCS 4 and I get the following message when trying to set a breakpoint. This of course makes debugging inpossible! Anyone have an idea?

"Target not run as breakpoint could not be set: Error programming AET Job: Register write failed"

over 14 years ago

0 Ki over 14 years ago

TI__Guru**** 481831 points

Hi Tom,

What is the full version number of your CCSv4 install ('Help->About Code Composer Studio')?

Thanks

0 Tom Cross over 14 years ago in reply to Ki

Prodigy 100 points

CCS Version 4.1.3.00038

0 Ki over 14 years ago in reply to Tom Cross

TI__Guru**** 481831 points

Tom,

Could you try updating your version of CCS to the latest version (4.2.3)? There were a bunch of 28x issues related to breakpoints introduced in 4.1.3 that have since been fixed.

You can update CCS via 'Help->Software Updates->Find and Install'

Thanks

0 Tom Cross over 14 years ago in reply to Ki

Prodigy 100 points

Thanks Ki!! As soon as I updated CCS the problem was gone!

Code Composer Studio™︎

Code Composer Studio forum

Unable to set Breakpoints