• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 462 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problems iwth flash programmer in CCS 4.2.3

yogendra tanguturu
Prodigy 110 points

I had imported the CCS 3.3 working build into CCS 4.2.3 and was able to compile it as well.

But I am getting the following errors when I selected " DEBUG ACTIVE PROJECT"

C28xx: Flash Programmer: Unable to read algorithm file (C:\Program Files\Texas Instruments\ccsv4\DebugServer\bin\win32\..\..\..\C2000\flashAlgorithms\FlashAPIInterface2812V2_10.out). Operation cancelled.

C28xx: Flash Programmer: Error erasing Flash memory.

C28xx: Flash Programmer: Unable to read algorithm file (C:\Program Files\Texas Instruments\ccsv4\DebugServer\bin\win32\..\..\..\C2000\flashAlgorithms\FlashAPIInterface2812V2_10.out). Operation cancelled.

C28xx: Flash Programmer: Unable to read algorithm file (C:\Program Files\Texas Instruments\ccsv4\DebugServer\bin\win32\..\..\..\C2000\flashAlgorithms\FlashAPIInterface2812V2_10.out). Operation cancelled.

C28xx: Flash Programmer: Error encountered when writing to flash memory

C28xx: Trouble Writing Memory Block at 0x3f6000 on Page 0 of Length 0xa

Cannot write to target

I am using the 2812 DSP processor and XDS510 USB emulator.