TMS320DM6467T debug problem

David Mota

i have this error:

can be a problem with the linker? iam using ccs4.2.2 DM6467 JTAG XDS100v2 14pin emulator

or maybe is the gel i dont know, someone help me?

0 Ki over 14 years ago

Hello,

If you are using the EVM from Spectrum Digital, you need to check your settings for SW3. If you have the factory defaults, try flipping SW6 to OFF.

Thanks

0 David Mota over 14 years ago in reply to Ki

thanks for the reply

you were referring about sw6 to the switch 6 of the sw3?

because i tasted and does not work.

another suggestion which would be the problem?

0 Ki over 14 years ago in reply to David Mota

David Mota said:
you were referring about sw6 to the switch 6 of the sw3?

Yes, sorry for the confusion.

David Mota said:
because i tasted and does not work.

What are the settings for all 8 switches that you are using for SW3?

0 David Mota over 14 years ago in reply to Ki

my configuration is : the fist 3 are on and the rest in off

off on

1 0

2 0

3 0

4 0

5 0

6 0

7 0

8 0

0 Ki over 14 years ago in reply to David Mota

Try flipping switches 5 and 7 to ON.

0 David Mota over 14 years ago in reply to Ki

thank you very much it's working now!!!

Code Composer Studio forum