CCSV5.1 CPU Load working?

What version of BIOS are you using? And for what target?

Sorry. Bios5. OMAP-L138.

Are you referring to the target side: the logged load data is not correct,

or the host side: no CPU load data shown in RTA?

Mike - What emulator are you using?

Bruce,

Bruce Lee (SDO) said:

Are you referring to the target side: the logged load data is not correct,

or the host side: no CPU load data shown in RTA?

I'm not sure what the "target side" means, but there is no logged data for CPU load, and there is no plot in the CPU load graph.

Ki, I am using the XDS560v2STM emulator. It's interesting that CPU load (log & graph) and Statistics work itermittently with my XDS100 USB emulator.

Also, the "hang" happens when I supend/start debugging.

Thx,

MikeH

Mike,

I observed the same issue on my L138 board. I had to power cycle the board and emulator and retry to get it working. Have you tried doing that yourself when using the XDS560v2?

Also note that RTA is not officially supported when using an XDS100 emulator.

ki