watch point, data access count, CCS4 and 28027

Harrison 2011

Expert 2085 points

I tried but found the features of watch point and data access count in breaking point view don't work for 28027 MCU, right?I am using CCS 4.

thank you

over 14 years ago

0 Ki over 14 years ago

TI__Guru**** 467401 points

Watchpoints should be supported. What is the full version number of your CCSv4 installation?

Thanks

0 Harrison 2011 over 14 years ago in reply to Ki

Expert 2085 points

thanks , I am using a free one downloaded on ti site.

so the free one doesn't support it?

Thank you

0 Ki over 14 years ago in reply to Harrison 2011

TI__Guru**** 467401 points

I'm looking for a version number. Like "4.2.4.00033". Check the number via 'Help->About Code Composer Studio".

0 Harrison 2011 over 14 years ago in reply to Ki

Expert 2085 points

Version:4.2.3.00004

thanks

0 Ki over 14 years ago in reply to Harrison 2011

TI__Guru**** 467401 points

That is pretty recent. Could you describe the problem in more detail? Are you setting a watchpoint and it is not triggering? If you could attach a reproducible test case, that would help a lot.

Thanks

0 Harrison 2011 over 14 years ago in reply to Ki

Expert 2085 points

Hi Ki,

I appreciate it a lot for your promopt reply.

now the watch points for both writte and read types are working after restarting both computer and the board, I don't know why but probaly I messed up something.I will keep trying to see if they come back.

Thank you for your help.

Code Composer Studio™︎

Code Composer Studio forum

watch point, data access count, CCS4 and 28027