• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CODECOMPOSER: PC Trace Only Works On One (Arbitrary) Core

Kier
Mastermind 9470 points
Part Number: CODECOMPOSER


The PC Trace configuration appears to offer PC Trace for all cores:

But Trace data appears only for R5_2. The others are blank citing "Receiver stopped" even though there is data available.

How can I display the trace data for the other cores please?

  • +1
    TI__Guru**** 472451 points

    Note that while you can have Trace views open for each core, trace data can only be collected for one core at a time. So if you run multiple cores simultaneously, you will only get data from one core. 

    Kier said:
    How can I display the trace data for the other cores please?

    You need to enable trace for that core (and that core only) to collect trace data for it.