Tool/software:
When using auto format, it munges up comment blocks surrounded by OG comment delimiters. For example, if I have this comment:
/*
Step Delay: a milliseconds delay between the movement of each servo. Allowed values from 10 to 30 msec.
M1=base degrees. Allowed values from 0 to 180 degrees
M2=shoulder degrees. Allowed values from 15 to 165 degrees
M3=elbow degrees. Allowed values from 0 to 180 degrees
M4=wrist vertical degrees. Allowed values from 0 to 180 degrees
M5=wrist rotation degrees. Allowed values from 0 to 180 degrees
M6=gripper degrees. Allowed values from 10 to 73 degrees. 10: the tongue is open, 73: the gripper is closed.
*/
After right-click format document, I get this:
/*
Step Delay: a milliseconds delay between the movement of each servo. Allowed
values from 10 to 30 msec. M1=base degrees. Allowed values from 0 to 180
degrees M2=shoulder degrees. Allowed values from 15 to 165 degrees M3=elbow
degrees. Allowed values from 0 to 180 degrees M4=wrist vertical degrees.
Allowed values from 0 to 180 degrees M5=wrist rotation degrees. Allowed values
from 0 to 180 degrees M6=gripper degrees. Allowed values from 10 to 73
degrees. 10: the tongue is open, 73: the gripper is closed.
*/
The obvious work around is to use the newfangled // delimiter, but I would think that auto-format should just leave comments alone.
