missing project templates

gaotai zhang

Other Parts Discussed in Thread: SYSBIOS

Hi,

I'm starting to learn IPC.I want to create a IPC project using the example projects mentioned in the IPC getting started guide. I followed the steps in the guide, clicked new /

CCS project, after a few *next*,I selected the device type and other params, then it came to the *create from template* part, there's SYS/BIOS and some other templates. But I can't find an IPC template, can you help me with this?

Thanks

over 14 years ago

0 Ki over 14 years ago

TI__Guru**** 481851 points

What CCS version are you using (provide the full build number)? And for what device are you building for?

Thanks

0 gaotai zhang over 14 years ago in reply to Ki

Intellectual 415 points

my ccs installation is 5.0.3 .I don't know the full build NO. But there is a vesion N201105110900 in ccs about. Also,xdctool version is 3.20.8.88. IPC version 1.23.1.26 .I'm building for an EVM6678L board . FYI, there is SYSBIOS templates in the new project wizard .

0 gaotai zhang over 14 years ago in reply to gaotai zhang

Intellectual 415 points

Hi Ki,

I looked in the about / Installation Details /plugin page in CCS and found the IPC related plug-ins. They are com.ti.rtsc.IPC.product_1.23.1.26 and com.ti.rtsc.IPC.product.ui . But I still can't find the project templates for IPC in the new project wizard

Thanks

0 gaotai zhang over 14 years ago in reply to gaotai zhang

Intellectual 415 points

Ki, I reinstalled CCS5 , and the IPC project templates appeared. I think something may have gone wrong with my earlier CCS installation although I don't know what it was. Anyway, I can work with the IDE now.

Code Composer Studio™︎

Code Composer Studio forum

missing project templates